Can the Snappy Trap be installed to a floor drain ?
Yes, it can. Depending on the preparation of the floor drain pipe, additional componentes may be needed. For a bare drain pipe coming from the floor, a 90 degree elbow with a marvel adapter will be needed to be installed to the drain pipe first.
Where can I buy a Snappy Trap™?
In the United States, Snappy Trap is available at all Home Depot stores and online at homedepot.com and amazon.com
What is The Length of the Snappy Trap™ Hoses?
Double Kitchen Sinks drain kit, hose length: 13"
Single Kitchen Sinks drain kit, hose length: 9"
All Bathroom Sinks drain kit, hose length: 9"
How Resistant is Snappy Trap™ to High Temperature?
It's safe to pour liquids down the drain up to
boiling point (212° F / 100° C).
What is the Difference Between Traditional Plastic Tubular Parts and the Snappy Trap™?
Traditional Plastic Tubular parts need to be
measured, cut and in some cases cemented or glued
The Snappy Trap™ comes pre-assembled and can be installed manually with basic or even no tools.
How Flexible are the Snappy Trap™ Hoses?
The Snappy Trap™ hoses are flexible enough
to adapt to most spaces under the sink.
However, they are not like an accordion or
corrugated hoses. The material (Flexible PVC)
is sturdy and is meant to withstand years of
daily use. Also, although corrugated hoses are
completely flexible, they clog easily, cause bad
odors, and do not meet plumbing code standards.
Does Snappy Trap™ meet Plumbing Code Standards?
Yes, Snappy Trap models # DK-110 and DK-100
are certified by the International Association of
Plumbing and Mechanical Officiials (IAPMO) to meet
the Uniform Plumbing Code (UPC). The UPC
certification is valid in all 50 states and Canada.
Part #ʼs DK-105 and # DK-120 are listed with IAPMO
to meet the criteria of IGC 328.
Can the Length of the Snappy Trap™ Hoses be Cut?
Yes. In most cases, it will not be necessary to cut the hoses. We recommend following all the steps mentioned in the instruction manuals and the tips mentioned in the videos before cutting the hoses.
If the hoses need to be cut, follow the steps in
I Have Very Limited Space Under my Kitchen Sink, Will The Snappy Trap™ Work for Me?
We recommend having at least 4" of available
vertical distance from the sink drain to the wall drain pipeto install the Snappy Trap. Please
follow the instructions on how to measure on each product detail page. For double sink installations with less than 4" of vertical clearance, the Snappy Trap Special Kit for Limited Vertical Distances may be used. ( This kit does require 1" of minimum vertical clearance.)
The Drainpipe Entering the Wall Below my Kitchen Sink is not Centered, Will I Be Able to Install the Snappy Trap?
Yes. The Snappy Trap adapts to drainpipes
that are positioned 10"-12" from the center of.
Does Food Or Waste Get Stuck In The Snappy Trap Hoses Causing Clogs Or Bad Odors?
No, the smooth interior is a proprietary feature of
the Snappy Trap. Food and waste do not get clog
Does The Y Fitting In The Kit For Double Kitchen Sinks Have A Diverter On The Inside?
Yes, the "Y" fitting includes a diverter.
What Should I Do If I Need Help During Installation?
Please visit our Support page for
special videos, these were made to address the most common installation issues. If you still
have questions, please email
us email@example.com or call us Mon-Fri 8:30 AM- 6:00 PM CST at (832) 900-9117.